Gearbox Manufacturer: Maintenance and Function of Gearbox
Published:
Dec 08,2020
Gearboxes are widely used, such as in wind turbines. Gearboxes are various important mechanical components in wind turbines. Its main function is to transmit the power of the wind wheel to the generator under the action of the wind and make it have the corresponding speed. The speed required by the generator to generate electricity is realized through the growth of the gears in the gearbox, so the gearbox is also called the speed increasing box. Let's learn about the maintenance and function of the gearbox together with the gearbox manufacturer.
Gearboxes are widely used, such as in wind turbines. Gearboxes are various important mechanical components in wind turbines. Its main function is to transmit the power of the wind wheel to the generator under the action of the wind and make it have the corresponding speed. The speed required by the generator to generate electricity is realized through the growth of the gears in the gearbox, so the gearbox is also called the speed increasing box. Let's learn about the maintenance and function of the gearbox together with the gearbox manufacturer.
1. Acceleration and deceleration are often called variable speed gearboxes.
2. The gearbox manufacturer pointed out that the gearbox can be used to change the transmission direction, for example, two sector gears can be used to vertically transmit the force to the other rotating shaft.
3. Change the momentum: Under the same power supply condition, the faster the speed, the smaller the torque of the shaft.
4. Gearbox clutch function: By separating the two initial meshing gears, we can achieve the purpose of separating the engine and load, such as brake clutch, etc.
5. Distribution of power: For example, we can use the engine to drive multiple loads from the main shaft through the main shaft of the gearbox, thus realizing the function of multiple loads.
The above is the relevant introduction of the gearbox manufacturer, and the gearbox should also do a good job of maintenance at ordinary times. Common gear box lubrication methods include gear oil lubrication, semi-liquid grease lubrication and solid lubricant lubrication. For seals, gear oil lubrication speed can be used, which can be lubricated with gear oil, which can be used to lubricate seal performance; For those with poor sealing performance and low rotating speed, semi-fluid grease can be used for lubrication. Ultrafine powder lubrication can be used for oil-forbidden occasions or high temperature occasions.
Related news